![]() USB port power: USB3 or USB2 providing at least 900mAĭC jack power: 12V DC, 1A, 5.5mm/2.1mm tip positive plugĬompatibility: All SCTs produced after 2006 except 5" SCT, all Edge HD, RASA 8", RASA 36cm, 7" Mak-Cass Microprocessor: NXP Kinetis series, Arm Coretex-M4 coreĪUX port power: Powered by Celestron computerized mount AUX port, connecting cable supplied ![]() Spur gears Brass: 1:1 gear ratio, 38mm diameter, 45 teethįocuser shaft coupler: Aluminum clamping sleeve To use third-party focuser control software, an ASCOM driver is needed. The Celestron PWI software can also control the focus motor. You may also opt to use an external 12V DC power source which plugs into the motor’s power jack.Ĭelestron offers a free Focuser Utility program for computer control. You will need a user supplied USB A-to-B cable. If you are not using a Celestron mount, you can power and control the focus motor from a computer USB port. This allows control from the mount’s hand controller (NexStar+ or StarSense) or a computer. When using a Celestron computerized mount, you can power and control the focus motor through the mount using the supplied AUX cable. There are three options for powering your Celestron Focus Motor: It can also be used with the 11” RASA, but requires the Focuser Retrofit Kit for RASA 11. It is compatible with all EdgeHD optical tubes, the 8” Rowe-Ackermann Schmidt Astrograph (RASA), the 36cm RASA, and the 7” Maksutov-Cassegrain. It is not compatible with 5” SCTs or older models. The focus motor is compatible with all SCTs from 6” to 14” in aperture that have been produced since the year 2006. As an added bonus, port covers protect the ports while not in use, and the covers cannot be lost due to the tethered design. Combined with computerized control of the mount and camera, the focus motor enables the imager to gather data remotely from a backyard observatory, or even a telescope located hundreds of miles away. With a motorized focuser installed, an astroimager no longer needs to be physically near the telescope to focus an image. A focus motor is great for visual observers who want to dial in exact focus (especially those with dexterity issues) and a must-have accessory for astroimagers. With the focus motor installed, you can bring celestial objects into sharp, precise focus using your telescope’s hand controller or a computer instead of using the focuser knob. The Focus Motor for SCT & EdgeHD provides electronic focusing for Celestron Schmidt-Cassegrain (SCT) and EdgeHD telescope optical tubes. Astro-Tech AT60ED and AT72EDII Black Friday Sale.Various Closeouts Meade, Kendrick, Bob's Knobs, JMI and others.Astronomics Used, Demo, Closeout, Spring Cleaning Page.Rechargeable Batteries And Power Supplies. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |